English
Español
Русский
Français
Description
As long as there is water, in principle, brass angle valve is needed. Brass angle valve is equivalent to a joint with switch, and is used to connect the outlet and inlet pipe
Product Details
It is equivalent to a joint with switch, and is used to connect the outlet and inlet pipe, and because for toilet, there is only cold water, it’s ok just to use one, while for basin, there are both hot and cold water, two ones are needed, so is the sink.
Because the volume is relatively small, it is usually installed on the wall that pasted on ceramic tiles. It can shut in and out of water conveniently at any time.
| DN | SIZE | A | B | C | D |
| 15 | 3/8"x1/2" | 27 | 76 | 35 | 7 |
| 15 | 1/2"x1/2" | 27 | 76 | 35 | 7 |
| 15 | 1/2"x3/4" | 30 | 81 | 40 | 9 |
| Pressure and temperature limitations for PN rated value | |||||
| PN | Pressure and temperature range | Pressure and Max temperature | |||
| ≤1.6Mpa | 16bar (-10℃ to 80℃) | 5bar (150℃) | |||
Remember, don't look down on these accessories; the problem is always here.
The home decoration usually has 4 positions where brass angle valves are needed. The water port on the toilet needs 1 cold. The water on the washbasin needs one cold and one heat. The water on the kitchen sink needs one cold and one heat. The water on the water heater needs one cold and one heat.
According to the above calculation, we need 7 brass angle valves, 4 cold and 3 hot. If you have 2 toilets in your home, you need 8 corner valves, 5 cold and 3 heat ones. If you have two bathrooms, two wash basins and two toilets, you will need 10 corner valves, 6 cold and 4 hot.
